|
Switch utilizes existing electrical wiring UPB technology offers more signal strength than X10 3-way ready switch provides a wide array of dimming options
Add dimming capabilities to a light in your house with the three-way-ready HAI UPB 600-Watt Dimmer, and you'll not only be able to insert the light into scenes, but you'll be able to control the light remotely from another room in your home. This UPBTM Dimmer Switch is used for controlling and dimming lighting loads up to 600 watts. UPB technology uses your existing wiring, so you don't need to run wires in order to take advantage of its properties. The HAI UPB 600-Watt Dimmer uses Universal Powerline Bus technology for superior performance and reliability. Similar to the standard X10 protocol, Universal Powerline Bus technology uses your existing power wires, so no rewiring is necessary in order to use this switch. But UPB benefits include its higher reliability, since its signal strength is stronger than X10, with increased electrical noise resistance. UPB products are NOT X10 compatible.
This 600 Watt UPB Dimmer Switch works as a stand-alone dimmer or may be used with room controllers, house controllers, or automation controllers. In addition, it may be used as a three-way controller when you add a UPB auxiliary switch (sold separately). With the free, downloadable UpStart software and a UPB Interface Module (sold separately), you can use your computer to configure and/or control UPB devices.
UPB technology allows enough individually addressable devices to control even large residential environments, usually without the need for phase coupling and without affecting or being affected by adjacent home environments. This wall switch controller mounts in a standard wall electrical box. It uses standard Decora-style mechanics and a standard Decora-style wall plate (sold separately). Please note that the HAI UPB 600w Dimmer does require the use of the white neutral wire, where most standard switches have no connection for the neutral.
Specifications | | HAI Product No.: | 35A00-1 | | UPC: | 872257001716 | | Dimensions: | 4.1" x 1.75" x 1.45" | | Weight: | 0.25 lb. | | Power Maximum: | 600 W | | Current Maximum: | 5A (non-dimming) | | Connections: | 18 GA | | Mounting: | Standard J box | | Input Power: | 120 +/- 12V AC | | Input Frequency: | 60 +/- 3 Hz | | Operating Temperature: | -40° F to 104° F | | Compliance: | UL, CE, and Energy Star approved | | Warranty: | 2 years, limited |
|
Installation & Operation Guide (196.09 KB) UpStart Configuration Software UpStart User's Guide (1.64 MB) UpStart Readme File (90.76 KB) |
Email Us: 
