|
The Model 100M kit is shipped with the following components:
- One manual ceiling register
- Two register mounting screws
- One installation guide
The Model 100M is designed as a direct replacement for conventional rectangular louvered registers in both
new construction and the existing home market. Two screws are included for mounting in the same manner as conventional metal registers. Raised bosses are provided on the back side as drill hole guides for standard
10”, 12”, and 14” register boxes. Replacement registers use the existing screw holes for mounting. Unlike
conventional registers, Model 100M registers are totally sealed when closed, bathe the entire room with full
360 degree air flow when open, and significantly reduce those uncomfortable drafts associated with heat
pumps during winter months. Airflow is adjusted by simply rotating the center disk. This can be easily
accomplished safely at floor level by use of a conventional suction cup and extension pole available at local
builder supply stores for changing ceiling light bulbs. Detailed Installation instructions are included with each
shipment of Model 100M registers. |
Email Us: 
